6" TRIM SAW Dual Blade - Complete
6" TRIM SAW Dual Blade - Complete
This hi-tech saw includes two 6" diamond sawblades, a 115v variable speed motor, a large saw table, a built-in water reservoir, easy cleanup, a vise for securing material.
In Stock
SKU
1-0890
$589.00
$589.00
$589.00
Free Shipping Item
Description 6" TRIM SAW Dual Blade - Complete
- • Includes (2) one 6” thin notched diamond sawblade and one 6” sintered diamond sawblade (has a 5/8" arbor)
- • 115v, 1/4 hp variable speed motor installed delivers speeds from 800 rpm to 3,400 rpm
- • Large, 15 1/2" x 9" saw table
- • Built-in water reservoir holds up to 16 oz of water
- • Fast and easy cleanup with easy-to-remove saw table
- • Machine dimensions: 17”L x 17”W
- • Complete Written & Visual Instructions
- • Vise is used to secure your material for you while you cut instead of you having to hold your material.
- • The carriage advances slowly to feed material evenly into the blade.
- Instruction General Manual.
- Stocked item ships from Norway, Michigan.
More Information
| Price | $589.00 |
|---|---|
| Brand | Hi-Tech Diamond |
| Motor HP | 1/4 hp |
| Blade Diameter | 6" |
| Arbor Size | 5/8" |
| Dimensions (Inches) (LxWxH) | 17" x 17" x 11" |
Customer Reviews
Customer Reviews
Quality
5
Value
5
Price
4
Solid saw, good shipping experience
Review by
M C
Shipping to Canada was easy. Duties were expensive but it was calculated prior to shipping and paid for in the total. No extra duties or delays through customs. YMMV of course
Saw itself is great. Will say that the vise needed me to remove the rubber and re-apply it at the end of the vice grips, it was spaced maybe 0.75 cm from the edge which is no good for small rough.
Saw itself is great. Will say that the vise needed me to remove the rubber and re-apply it at the end of the vice grips, it was spaced maybe 0.75 cm from the edge which is no good for small rough.
Write Your Own Review
Product Questions (9)
Customer Questions
The maximum height is only at the center of the blade. So your whole stone will need to pass this in order to cut. You can expect around 2.25".
You can, but Reentel recommends using water.
This would cut rocks, you could also cut out shapes with it.
Yes, you could use this method to cut a larger stone.
Silver notched diamond blade is 6" x .012" x .015" The Red sintered diamond blade is 6" x .015" x .023".
This is 110 volt. It is available in 220 volt if needed
No. If you are in Michigan you will have tax added. If you are in any other state you will not be subject to sales tax at this time (1/19/21)
yes, depending on the height of the stone. The depth of cut is going to be less than 2.5 inches.
around 15 lb
Loading...