Product Questions
i have an 8" slanted lap. I need a new 180 grit disc. Which disc should I order, with an adhesive backing or one without?
Both will work for you since the center post would screw down and hold the disc in place on top of the master lap/backing plate. If you have any other questions, please email sales@kingsleynorth.com
Read More
what is the size of the oil reservoir on the model 1510 trim saw?
It takes about 1/2 gallon of coolant to fill to about 1/4" up on the blade.
Read More
What is the actual diameter of a 20 inch blade? Are they variable depending on make, 19 3/4, 19 1/2? Etc. I believe none of them are actually 20
They range from 19 1/2 - 19 3/4. none are a true 20" exactly. Blades may be nominally sized for identification purposes.
Read More
How to remove the cover from my trim saw
That will depend on the trim saw that you own. Generally there's 2-4 screws (possibly more) either on the top of the table or the side that will need to be either loosened or removed before you can remove the trim table. If you email sales@kingsleynorth...
Read More
how can i stop the expandable drum belts from walking off the drum?
Is the drum running at 1725rpm? They are directional, so make sure you don't have it backward. Is it all belts or just one? Email info@kingsleynorth.com
Read More