Description Mini-Sonic Tumbler -MT14SV (1) 14 lb hoppers

MT-14 MINI-SONIC™ VIBRATORY TUMBLER
This model features 3 speed controls and a single MT-14 hopper (12 lb. capacity) You control the tumbling action with a Mini-Sonic Tumbler, from the gentle processing of opal to the full power processing of agates, jaspers, topaz, etc. Tumble polish baroques, preforms, beads, sea shells, metals, etc., fast and efficiently and without changing the shapes to any measurable degree. You can even tumble polish carvings without wearing away delicate features.
MT-14 feature dial speed controls for selecting the power required to control tumbling action and speed of rotation.
The Mini-Sonic tumblers are not your ordinary vibratory tumblers—the unique action of the Mini-Sonic tumblers is achieved without shafts, belts, pulleys, eccentric weights or even a motor. Without any moving parts to wear out or a motor to burn up, these tumblers will last longer than other small vibratory type tumblers. Hoppers are of cast plastisol and the tumbler housing is made of durable ABS plastic. You get quality materials and workmanship in the Mini-Sonic tumbler
The opening of the MT 14 Hopper measures roughly Width 3 ¾ x Length13 1/8 x Depth 6 ¼. Please note that each hopper is manually cast, which may result in slight variations.
*California & Michigan subject to sales tax.
4-6 Week Lead Time

More Information

Price	$879.65
Brand	Diamond Pacific

Product Questions (2)

Customer Questions

how big of a rock slab can be polished

The slab would have to be on the smaller side. While this barrel is longer than the others in this series, it is still limited on the width. Which is approximately 2.8 inches. With ceramic media, a 2x2 or 2x3 inch slab would be the maximum. This is because...

Was this answer helpful? ⌃ | ⌄

You must be login to give rating

Roughly, How long does it usually take from start to finish with this tumbler. Let’s say to get a decent polish, not ultra polished, but polished enough.

Generally, each 4 steps take about 7-10 days each. After polishing, Burnishing then takes about 4 days. Total tumbling days should be between 30 - 44 days.