Kingsley North Cabber 6 - KNC6 Rev 2

This is just one speed.

If it is no more than 1 valve open perside, then yes it should work. Bu the the flow will decrease.

Search for sku: 1-1338. We have allocated the Nova and Galaxy wheels for these units. So, yes, they are in stock.

So with the CabKing and Genie trim saw attachements you aren't extending the shaft to have a trim saw. You are taking off the existing wheels on the right-hand side to make room for the spacers and blades. We recommend just getting a dedicated trim saw.

1" OD & 3/4" ID

3/4 inch inside diameter is correct.

The KN wheels are ready to use as soon as you receive the machine. That is, there is no break-in required. The Nova wheels will require breaking in. They will also generally last longer. At the end of the day, both wheels will bring your stone to a polish. You could start with the standard wheels and switch them later on, it is only a couple of spacers in difference.

The Nova wheels will last longer. The grits are the same however and either will produce a polished stone.

The submersible pump, which goes into a 5 gallon pail. The water supply tubing is coming from the back of the machine.

Yes, email us and we can setup an order.

These wheels require no break in and are ready to use.

Yes, email sales@kingsleynorth.com with your country and we can source a power cord for you.

Yes, it can be used without the hold down clips in place

No, they are just the regular smooth Kingsley North wheels. No break-in required.

The motor can not be operated above 104 f ambient room temperature.

Yes, with the right spacers you could,

This machine takes 6 inch wheels. The arbor size is 1 inch.

You will just need different spacers, no wheel bushings are required. Are you placing all of the wheels? This will depend on how many wheels you are replacing.

The arbor shaft on the machine will be around 1,600 rpm

Water only for this Cabber. This includes a pump that is only usable in water.

This SKU is for the Cerium disc alone is 1-0303 (depending on your purchase date this could be 6" or 5.5"). If you want the complete setup, call us, we have new discs that aren't listed yet.

To ensure the machine arrives undamaged we use this foam. You can break the foam in order to remove it from the machine.