CABKING WHEEL SET 6V3

These are made by the same manufacturer as the Cab King.

Yes, the spacing might be a little different but they will fit on the arbor.

Yes, the part numbers for those three wheels are 1-1021, 1-1024, 3-0300.

The wheels are 1" arbor with bushings down to 1/2"

These are new, good quality wheels. They are not factory seconds.

You should be able to use these right out of the box. If you feel they need a little breaking in you can run a hard agate over them briefly to remove any outer rind before using them but you shouldn't have to spend too much time breaking them in, if any at all.

~ 23.05 FedEx Home Delivery

Depending on the shaft length, maybe

80 & 220 are 1.5 inches wide. 280, 600, 1200, 3000 are 1.5 inches as well.

Yes, because it comes with the bushings to reduce the arbor size.

Yes, they come with a bushing to adapt.

This is a replacement wheel set for 6" 6 wheel cabbing machines

Yes, there is a bushing that will accommodate most shaft sizes.

Yes, these are the same wheels that are on the REV2