Description Complete Polishing Head

All threaded and smooth shafts are covered here. Choose your diameter, arbor size, with or without threading. For both the left an right hand side of your machine. This comes with a rubber backing. Polishing surfaces are sold separately.

Product Questions (4)

Customer Questions

I bought a Highland Park C8 Cabbing Machine, it takes 8" wheels. I would like to know which one do I pick in the drop down menu.

I'm not sure what you will need for that machine as we do not carry any highland park machines. These are polishing heads though, not wheels. If you need one of these you will need to find out the size of your arbor and the threading. If you're looking...

Was this answer helpful? ⌃ | ⌄

You must be login to give rating

Could you please tell me which one from the list would be correct for the right hand side of the cabking 6v3?

Neither will work. Search for these numbers, they will work: 1-0203 (canvas 5.5" 1/4-20 right hand thread), 3-0417 (360 grit no hole 1/4-20 right hand thread)

Was this answer helpful? ⌃ | ⌄

You must be login to give rating

Will this work on a 6” B&I gem maker with a 1/2” arbor?

Depending on the shaft type it might. The smooth shaft model has setscrews that retain the polishing head in place. The other two options are for the right or left side. The threads per inch on the 1/2" model is 20.

Was this answer helpful? ⌃ | ⌄

You must be login to give rating

I bought an old Frantom with a expandable drum and and 2 grinding wheels with a place for a polishing wheel on the end. Can you help direct me on what product I need to buy here to outfit it with?

What you are going to want to do is: measure the diameter, then measure the threads per inch. Do this by counting the threads in one ich.